The dlinkrouter.local COVR-3902 AC3900 Wi-Fi Router uses the high power wireless router by using is the core that offers the power zone with the fast speed up to 2533Mbps that takes the outer edge. The http://dlinkrouter.local COVR-3902 Wi-Fi System is a progressive wireless system administration arrangement involved of the COVR-2600R AC2600 Wi-Fi Router and COVR-1300E AC1300 Wi-Fi Range Extender. The dlinkrouter.local Covr Wi-Fi System uses a High-Power Wi-Fi Router at its center to offer a “PowrZone” of blasting quick Wi-Fi, while the Covr Seamless Extender deals with the external edge. Naturally, interface with the most grounded sign as you travel through your home for up to 6,000 sq. ft of the consistent entirety home inclusion.
Key Features of D-Link COVR-3902 Router
- High Power Wi-Fi Router with Whole-home Seamless Network
- High Speed with the Wired and Wireless Internet Connectivity
- MU-MIMO 4*4 Technology
- Router With Expandable Network
How to Setup and Login to Dlinkrouter.local COVR-3902 Router?

Setup Method 1: Using the Web Interface
- In the foremost case, you will need to Interface the force connector to the COVR Router and fitting it into a power attachment. Permit around one moment to boot up. When the force LED is green, it’s prepared. Try not to plug the extender yet.
- You can utilize either a wired (Ethernet) or remote (Wi-Fi) connection with setting up the COVR Wi-Fi System.
- Dispatch an internet browser, (for example, Internet Explorer) and enter dlinkrouter.local or the IP address on the router (default 192.168.0.1), or http://dlinkrouter.local into the location bar.
Note: On the first occasion when signing in, the wizard will consequently begin. If you are excited to sign in, enter the secret phrase (clear as a matter of course) and tap to the Log in. From the Home screen, drift over Settings at the top and snap Wizard. Then click on the Next to proceed.
- Interface the force connector to the COVR extender and plug it in close to the D-link Router.
- Click on the Next and permit as long as two minutes for the extender to boot up and interface with the router.
- In the last step, you will need to click on the Next button to proceed to the next procedure.
Method 2: D-Link COVR Setup by Using Wi-Fi Application
- In the foremost case, you will need to connect your cell phone (cell phone or tablet) to the Wi-Fi SSID/secret key composed on the name at the base of the dlinkrouter.local router.
- Introduce D-Link Wi-Fi App to your cell phone. It’s supportable by both Android and iOS.
- Dispatch the D-Link Wi-Fi App. If the device is associated with SSID on the name, Cover will be consequently filtered.
- The info the PPPoE association username and secret phrase.
- In the last step, you will need to confirm the related data once more. If that there’s no issue, click SAVE.
How do I change the Password of the D-Link COVR-3902 Router?

- In the foremost case, you will need to navigate the web browser into the connected device by using the web address http://dlinkrouter.local or the default IP address of the router.
- Go and click on the Management tab then select the system admin.
- Here you will need to fill the password you will like to set then hit the save tab.